Update Bios Settings; Clear Cmos Data Selection - Protech Systems PA-6322 User Manual

2.6.19

Update BIOS Settings

JP1: Update BIOS settings
SELECTION
Normal
(Default)
Update
BIOS*
2.6.20

Clear CMOS Data Selection

JP2: Clear CMOS data selection
SELECTION
Normal
(Default)
Clear CMOS*
*To clear CMOS data, power off the computer first and set the jumper to "Clear
CMOS" as shown above. After five to six seconds, set the jumper back to "Normal"
and power on the computer.
PA-6322 SERIES USER MANUAL
JUMPER SETTING
Open
1-2
JUMPER SETTING
Open
1-2
Chapter 2 System Configuration
JUMPER ILLUSTRATION
1
JP1
1
JP1
JUMPER ILLUSTRATION
1
JP2
1
JP2
Page: 2-25