®
3.1.2
Intel
Chipset Software Installation Utility
3.1.2.1
Introduction
®
The Intel
Chipset Software Installation Utility installs Windows *.INF files to the
target system. These files outline to the operating system how to configure the Intel
chipset components in order to ensure the following features function properly:
SATA Storage Support (SATA & SATA II)
•
USB Support
•
Identification of Intel
•
3.1.2.2
Installing Intel
The utility pack is to be installed only for POSReady 7 & Embedded 8 Industry
series, and it should be installed right after the OS installation is completed. Please
follow the steps below:
1.
Connect the USB CD-ROM device to PA-6322 and insert the driver disk.
2.
Open the "Main Chip" folder where the Chipset driver is located (depending
on your OS platform).
3.
Click Setup.exe file for driver installation.
4.
Follow the on-screen instructions to complete the installation.
5.
Once the installation is completed, shut down the system and restart PA-6322
for the changes to take effect.
PA-6322 SERIES USER MANUAL
®
Chipset Components in Device Manager
®
Chipset Driver
Chapter 3 Software Utilities
Page: 3-3