Update Procedure - Protech Systems PA-6322 User Manual

3.5.3

Update Procedure

I. Prerequisites
1. Prepare a bootable media (e.g. USB storage device) which can boot the system to
DOS prompt.
2. Download and save the BIOS file (e.g. 67220PD1.bin) to the bootable device.
3. Copy AMI flash utility – AFUDOS.exe (V5.07) into the bootable device
4. Make sure the target system can first boot to the bootable device.
(1) Connect the bootable USB device.
(2) Turn on the computer and press <Del> or <Esc> key during boot to enter
BIOS setup menu.
(3) The system will go into the BIOS setup menu.
(4) Select [Boot] menu as the picture shown on the next page.
(5) Select [Hard Drive BBS Priorities] and set the USB bootable device as the
st
1 boot device.
(6) Press <F4> key to save the configuration and exit the BIOS setup menu.
PA-6322 SERIES USER MANUAL
Chapter 3 Software Utilities
Page: 3-137