Do Not Disturb Override - Panasonic KX-TA1232 Programming Manual

General Programming

[507] Do Not Disturb Override

Description
This program determines which Classes of Services (COS) are allowed to perform Do Not
Disturb (DND) Override.
Selection
• COS number: 1 through 8,
• Disable / Enable
Default
All COS — Disable
Programming
1.
Enter 507.
Display: 507 DND OVERRIDE
2.
Press NEXT.
Display: COS NO?
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To program another COS, press NEXT or PREV, or SELECT and the desired COS
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• To assign all COS to one selection, press the
the contents programmed for COS 1.
• Program [601] Class of Service is used to assign a Class of Service to each extension.
Features Guide References
Do Not Disturb (DND) Override
146
( =all COS)
key in step 3. In this case, the display shows
Programming Guide