Call Forwarding To Outside Line - Panasonic KX-TA1232 Programming Manual

[504] Call Forwarding to Outside Line

Description
This program determines which Classes of Services (COS) are allowed to perform the Call
Forwarding to Outside Line function.
Selection
• COS number: 1 through 8,
• Disable / Enable
Default
All COS — Disable
Programming
1.
Enter 504.
Display: 504 CALL FWD CO
2.
Press NEXT.
Display: COS NO?
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To program another COS, press NEXT or PREV, or SELECT and the desired COS
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• To assign all COS to one selection, press the
the contents programmed for COS 1.
• Program [601] Class of Service is used to assign a Class of Service to each extension.
Features Guide References
Call Forwarding — to Outside Line
Programming Guide
( =all COS)
key in step 3. In this case, the display shows
General Programming
143