Exit Rollers; Sensor; Floor Assembly And Top Cover - Pitney Bowes ADDRESSRIGHT DA500 Operator's Manual

Exit Rollers

Sensor

Floor
Assembly and
Top Cover
Pitney Bowes DA500/DA550 Operator Guide
If the right and left exit rollers are misaligned, that is,
contact printed surfaces, they can become contaminated
with ink. Use water to dampen a soft cloth and remove
the ink from the rollers.
A film and/or dust can build up on the sensors and couse
misfeeds of the material. Lift the transport door and use
compressed air to blow dust from the sensors. Cans of
compressed air are available from many computer supply
houses.
Periodically wipe the cover and floor assembly (feed deck)
with a soft cotton cloth, dampened with water only.
Printer Maintenance • 5
Sensor Location
5-3