Operating Errors And Countermeasures; Overview; File Errors - Omron WS02-CFSC1-E Operation Manual

Operating Errors and Countermeasures

5-1

Operating Errors and Countermeasures

5-1-1

Overview

5-1-2

File Errors

60
If an error occurs while the NE1A Logic Simulator is running, a dialog box will
appear with an error message. The errors can be cleared using the following
countermeasures.
Error message
Failed to load EDS The simulation file that you tried to open is not supported by
file. the installed Network Configurator. Update the version of the
Network Configurator.
Access to 'file name' 1. The simulation file that you tried to save is being used else-
was denied. where. Close the application that is using the file.
2. You do not have access rights to the simulation file that you
are trying to open or save. Select a file that you have access
rights to.
A sharing violation The simulation file that you tried to open is being used by
occurred while another application. Close the application that is using the file.
accessing 'file
name'.
Processing failed. 1. The file you tried to import is not in timing chart format.
Specify a valid timing chart file.
2. You do not hove access rights to the timing chart file that you
are trying to import or export. Select a file that you have ac-
cess rights to.
The password was The entered password does not match the password that has
not correct. Please been set in the logic program. Enter the correct password.
enter the correct
password.
This program is not The function block used in the logic program is missing a nec-
complete and can- essary input. This program cannot be simulated. Correct the
not be executed. program with the Network Configurator and create the simula-
Please select an tion file again.
executable file.
This program is not The function block used in the logic program is missing an
complete and can- input or an output. It cannot be downloaded to the actual
not be download to device but a simulation can be run.To run a simulation, click
the device. Continue the YES Button, otherwise click the Cancel Button and correct
anyway? the program with the Network Configurator.
The current file will The file that you tried to open is already open. To overwrite the
be overwritten with already opened file, click the YES Button. To leave it and con-
'file name' from the tinue using the already opened file, click the No Button.
disk. OK?
The file is not valid. 1. The file that you tried to import is not in simulation file format.
Please specify a Specify a valid simulation file.
valid file.
2. The file that you tried to import is not in timing chart file for-
mat. Specify a valid timing chart file.
Unexpected file for- The file that you tried to open or import is not in simulation file
mat. format. Specify a valid simulation file.
Section 5-1
Countermeasure