Opening Simulation Files - Omron WS02-CFSC1-E Operation Manual

Opening Simulation Files

2-10 Opening Simulation Files

1,2,3...
Note
18
Use the following procedure to load the simulation file (*.smr file) to run a sim-
ulation.
1. Select File - Open.
The following dialog box will be displayed.
2. Select the simulation file and click the Open Button.
If there is a password setting on the program in the opened simulation file,
the following Confirm Password Dialog Box will be displayed.
3. Enter the password and click the OK Button.
Note If there is no password setting, the Confirm Password Dialog Box
will not be displayed.
The simulation file (*.smr file) will be loaded and displayed on the screen.
To set the password, select the Enable Password Option on the Program Tab
Page of the Edit Device Parameter Dialog Box in the Network Configurator.
Section 2-10