Operating Procedures; Dip-Switches Configuration - Omron F3SP-U4P-TGR User Manual

F3SP-U4P-TGR
7

OPERATING PROCEDURES.

7.1 DIP-SWITCHES CONFIGURATION.

The configuration indicated in the table must be selected on both the dip-
switches available in the front cover.
4
X
3
Off
On
2
Off
On
•
The control-unit is Factory default set with the following configuration:
Automatic reset, the maximum duration of the muting: sixty seconds.
* Infinite muting duration: this feature must be used carefully because it's against
the norm. Using this, the user must know that it's works under it's sole
responsibility.
Function
not used
Function
muting A-B act on the light curtain 1.
muting C-D act on the light curtain 2.
Forbidden
Function
muting 60 s
muting ∞ s *
User's manual
SW 1
ON
1
1
2
2
3
3
4 4
function
1
Off interlock mode
On automatic mode
SW 2
ON
17