I/O Breakpoint
Note
4-10-2 Enabling/Disabling the I/O Breakpoint
Enabling the I/O
Breakpoint
1,2,3...
Disabling the I/O
Breakpoint
1,2,3...
• Only one I/O breakpoint can be registered. Up to a maximum of ten condi-
tions can be assigned for the I/O breakpoint.
• Double-click a tag in the Applied Conditions List Area to turn it ON and
OFF.
1. Select Breakpoints - I/O Breakpoint - Enable.
The I/O breakpoint will be enabled.
1. Select Breakpoints - I/O Breakpoint - Disable.
The I/O breakpoint will be disabled. Even if the I/O breakpoint conditions
are satisfied, the timing chart will not be stopped.
Section 4-10
57