Inputs To The Timing Chart; Basic Input; Pulse Setting; Copying And Pasting In The Timing Chart - Omron WS02-CFSC1-E Operation Manual

Inputs to the Timing Chart

4-4

Inputs to the Timing Chart

4-4-1

Basic Input

1,2,3...
4-4-2

Pulse Setting

1,2,3...
4-4-3

Copying and Pasting in the Timing Chart

1,2,3...
This section explains how to apply inputs to the tags that have been added to
the timing chart. The output tags, jump address, and function blocks cannot
be changed.
Use the following procedure to turn the input tags to ON or OFF or to reverse the tag
status.
1. Move the cursor to the area where you want to apply an input to the timing
chart. An area can be selected.
2. Select ON, OFF, or Reverse from the Timing Chart Menu.
A specified pulse can be assigned using the following procedure.
1. Select the area on the timing chart where you want to apply the set pulses.
2. Select Timing Chart - Make Pulses. Alternatively, right-click in the select-
ed area and select Make Pulses from the pop-up menu.
The following dialog box will be displayed.
3. Set the number of pulses and the start pulse, and then click the OK Button.
The specified pulses will be applied to the selected area.
1. Select the area on the timing chart to be copied.
2. Select Edit - Copy. Alternatively, right-click and select Copy from the pop-
up menu.
3. Move the cursor to where you want to paste and select Edit - Paste. Alter-
natively, right-click and select Paste from the pop-up menu.
Section 4-4
45