Adding To The Timing Chart; Adding From The Tag List; Adding From The Tag List Window; Adding From The Logic Window - Omron WS02-CFSC1-E Operation Manual

Adding to the Timing Chart

4-3

Adding to the Timing Chart

4-3-1

Adding from the Tag List

1,2,3...
4-3-2

Adding from the Tag List Window

1,2,3...
4-3-3

Adding from the Logic Window

1,2,3...
44
Use the following procedure to add a tag or a function block output to the tim-
ing chart. A maximum of 1,000 tags can be added to a timing chart.
1. Select Timing Chart - Add Tag.
2. Select the tag to be added to the timing chart and click the OK Button. The
tag will be added to the timing chart.
More than one tag can be added at the same time by holding down the Ctrl
Key or Shift Key while selecting the tags.
1. In the Tag List Window, select the tag to be added to the timing chart.
2. Right-click and select Add to Timing Chart from the pop-up menu.
The tag will be added to the timing chart.
1. Select an input tag, output tag, jump address, or function block from the
logic window to be added to the timing chart. More than one item can be
selected by holding down the Shift Key while selecting the items.
2. Right-click and select Add to Timing Chart from the pop-up menu.
The tags will be added to the timing chart.
Section 4-3