Editing The Timing Chart With A Text Editor - Omron WS02-CFSC1-E Operation Manual

Inputs to the Timing Chart
4-4-4

Editing the Timing Chart with a Text Editor

1,2,3...
Note
46
The timing chart can be edited with a text editor by using the copy and paste
functions.
1. Select the area of the timing chart that you want to edit.
2. Select Edit - Copy.
The contents will be copied to the clipboard.
3. Start a text editor and paste the content of the clipboard in it. The data will
be displayed in 0s and 1s as shown below.
4. After the text has been edited, copy the text in the text editor to the clip-
board.
5. Go to the timing chart and select Edit - Paste.
When using a text editor to edit the timing chart, do not delete the first line
'NE1ASimulatorTimingChart'. If this line is missing, or characters other than 0
and 1 are entered, the data cannot be pasted.
Section 4-4