Using the Watch Window
2-13-5 Modifying Tag Values
Note
1,2,3...
2-13-6 Moving Tags
1,2,3...
When the Logic Window is used for debugging, input tags that have been
added to the Watch Window can be set, reset, or reversed.
Output tag values or function block output values cannot be modified.
1. Select a tag from the Watch Window to modify its value. More than one tag
can be selected by holding down the Ctrl Key or the Shift Key while select-
ing the tags.
2. Select Debug and then Set, Reset, or Reverse. Alternatively, right-click
and select Set, Reset, or Reverse from the pop-up menu.
Tags that have been added to the Watch Window can be moved up or down.
1. Select a tag to be moved from the Watch Window. More than one tag can
be selected by pressing the Ctrl Key or the Shift Key while selecting tags.
2. Select Watch - Move Up (or Move Down). Alternatively, right-click and se-
lect Move Up (or Move Down) from the pop-up menu.
Section 2-13
25