Omron WS02-CFSC1-E Operation Manual page 8

About this Manual:
This manual describes the installation and operation of the Logic Simulator and includes the sections
described below. The NE1A Logic Simulator is a software package that runs on Windows and is used
to simulate and verify the operation of programs for NE1A Safety Network Controllers.
Please read this manual carefully and be sure you understand the information provided before
attempting to install or operate the NE1A Logic Simulator. Please use this manual together with the
DeviceNet Safety System Configuration Manual (Cat. No. Z905) and the Network Configurator Opera-
tion Manual (Cat. No. W382). Be sure to read the precautions provided in the following section.
Precautions provides general precautions for using the NE1A Logic Simulator.
Section 1 provides an overview of the NE1A Logic Simulator, including features and system require-
ments.
Section 2 describes the basic operation of the NE1A Logic Simulator.
Section 3 describes how to debug programs for the NE1A Logic Simulator using the Logic Window.
Section 4 describes how to debug programs for the NE1A Logic Simulator using the Timing Chart
Window.
Section 5 describes troubleshooting problems that can occur based on error messages displayed by
the NE1A Logic Simulator.
!WARNING
Failure to read and understand the information provided in this manual may result in per-
sonal injury or death, damage to the product, or product failure. Please read each section
in its entirety and be sure you understand the information provided in the section and
related sections before attempting any of the procedures or operations given.
ix