Advertisement
UX-F70MD/UX-F72MD
Removing the system control board
Prior to performing the following procedure, remove
the rear cover, the side panels and the cassette
mechanism assembly section.
1.
Remove the screw G on the left side of the body.
2.
Disconnect the card wire from connector CN701 and
CN721on the system control board.
3.
Disconnect connector CN709, CN711 and CN712 on
the system control board from the body outward.
4.
Disconnect the card wire from connector CN704 on
the underside of the system control board.
Removing the tuner board (See Fig.10)
Prior to performing the following procedure, remove
the rear cover and the right side panel.
1.
Disconnect the card wire from connector CN1 on the
tuner board on the right side of the body.
2.
Remove the screw H and remove the tuner board
upward while disengaging the three joint c.
1-8
(See Fig.9)
System control board
CN701
CN721
CN712 CN711
G
CN704
Fig.9
Tuner board
CN1
H
Joint c
Fig.10
CN709
Advertisement
