Advertisement
Removing the LCD board assembly
Prior to performing the following procedure, remove
the relay board and the LCD section.
1.
Remove the four screws W
cover.
2.
Remove the four screws X attaching the LCD panel
on the back of the LCD section.
3.
Remove the LCD cover.
4.
Release the joint g
assembly in the direction of the arrow.
(See Fig.35 to 39)
attaching the case
and remove the LCD board
Joint g
LCD board assembly
Fig.39
W
W
Fig.35
X
X
Fig.36
LCD panel
Fig.37
LCD cover
Fig.38
UX-F70MD/UX-F72MD
Case cover
W
W
LCD section
1-15
Advertisement
