JVC UX-F70MD Service Manual page 22

UX-F70MD/UX-F72MD
<Traverse mechanism assembly>
Removing the Insulators (See Fig.16)
1. Disengage the four insulators from the notches of the
traverse mechanism chassis.
Removing the pickup unit (See Fig.17)
1. Turn over the traverse mechanism assembly and
remove the screw J attaching the shaft holder (F).
2. Move the shaft inward and remove it from the shaft
holder (R).
3. Detach the shaft side of the pickup unit upward and
release the joint h with the pickup guide. Then
remove the pickup unit with the shaft.
Removing the pickup (See Fig.18)
1. Draw out the shaft from the pickup.
2. Remove the two screws K attaching the rack spring.
1-22
Pickup unit
Insulators
Traverse machanism chassis
Fig.16
Joint h
Shaft holder (F)
J
Fig.17
K
Rack spring
Fig.18
Insulators
Pickup guide
Pickup unit
Shaft holder (R)
Pickup
Shaft