UX-F70MD/UX-F72MD
<MD mechanism assembly section>
Prior to performing the following procedure, remove
the rear cover, the side panels, the cassette
mechanism assembly section, the fan assembly and
the MD mechanism assembly section.
Removing the MD mechanism assembly
1.
Remove the four screws P attaching the brackets
(1) and (2) on the left and right side of the MD
mechanism assembly.
2.
Disconnect the card wire from connector CN521 on
the MD mechanism board.
3.
Remove
the
MD
downward.
1-12
(See Fig.24 to 26)
mechanism
bottom
cover
MD mechanism assembly
brackets (1)
Fig.24
MD mechanism assembly
P
Fig.25
MD mechanism assembly
CN521
Fig.26
P
brackets (2)
MD mechanism bottom cover