System Maintenance Switch - HP Apollo 2000 System Maintenance And Service Manual

Item Description
10 Dedicated iLO port connector
11 NMI header
12 PCIe x16 riser board connector*
13 microSD slot
14 System battery
15 M.2 SSD riser connector
16 TPM connector
17 Processor 1
18 Processor 2
For more information on the riser board slots supported by the onboard PCI riser connectors, see PCIe riser
board slot definitions.

System maintenance switch

Position
S1
S2
S3
S4
S5
S6
S7
S8
S9
S10
S11
S12
You can access the redundant ROM by setting S1, S5, and S6 to On.
When the system maintenance switch position 6 is set to the On position, the system is prepared to erase all
system configuration settings from both CMOS and NVRAM.
138 System maintenance switch
Default Function
Off
Off = iLO security is enabled.
On = iLO security is disabled.
Off
Off = System configuration can be changed.
On = System configuration is locked.
Off Reserved
Off Reserved
Off
Off = Power-on password is enabled.
On = Power-on password is disabled.
Off
Off = No function.
On = ROM reads system configuration as invalid.
Off
Off = Set default boot mode to UEFI.
On = Set default boot mode to legacy.
— Reserved
— Reserved
— Reserved
— Reserved
— Reserved