Siemens Milltronics BW500 Operating Lnstructions page 60

Note:
• Press
• Whenever you wish to change a value, press
Press
P355 Online Calibration Feature
Select: 0-Off, 1-On
Select the Online Calibration feature:
Press
Access
P355 Online Calibration Features
Select: 0-Off, 1-On
Enter the weigh bin reference weight, (the amount of material the bin holds between the
high and low levels), in units selected in P005.
Press
Access
P356 Online Calibration
Enter Reference Weight
Enter the max., high, and low limit setpoints as a percentage in P357.
Press
Access
P357-01 Online Calibration Limits
MAX Limit:
Press
Page 54 Milltronics BW500 and BW500/L - OPERATING INSTRUCTIONS 7ML19985DK05
twice, to enter a parameter number directly.
to enable the EDIT mode.
EDIT mode: value can be changed
E
0
Value is accepted
V
1
e.g. reference bin weight
V
10.000
limit as a percentage
V
90.0