Siemens Milltronics BW500 Operating Lnstructions page 119

1)
P008 Date
Enter the current date in
yyyy = year
mm=month, 01 –12
dd=day, 01 – 31
e.g. 1999-03-19 (March 19, 1999)
1)
P009 Time
Enter the current time in
Where:
hh=hour
mm=minute
ss=second
P011 Design Rate
Specifies the design rate of material flow for the belt scale (
Enter the design rate in the units selected (P005).
P014 Design Speed
Specifies the design speed for the conveyor belt (
Speed units are:
feet/min if the imperial system of measurement has been selected, P004 = 1
metres/s if the metric system of measurement has been selected, P004 = 2
P015 Speed Constant
Set the speed constant for the speed sensor selected (P015-01 or 02)
The value in P015-01 is used with the speed sensor frequency, to calculate the actual belt
f
speed ( = 0.000).
The value in P015-02 is used for differential speed detection
Entry: If speed input is wired for constant speed (terminals 17/18 jumpered), value
defaults to jumpered, and the second speed sensor is ignored.
If the speed input is connected to a speed sensor, press
to P690. Refer to
1)
Not available with BW500/L.
2)
Index 02 is not available with BW500/L
7ML19985DK05Milltronics BW500 and BW500/L - OPERATING INSTRUCTIONS
yyyy-mm-dd
format:
hh-mm-ss
24 hour format.
P690
on page 139 for speed constant entry.
f
= 0.00).
f
= 0.00)
2)
.
1)
.
. P015 automatically jumps
Page 113