Mounting the Enclosure
1.
Remove the lid screws and open the lid to reveal the mounting holes.
2.
Mark and drill four holes in the mounting
surface for the four screws (customer supplied).
3.
Fasten with a long screwdriver.
Please note:
•
Recommended mounting: directly to wall or to
electrical cabinet back panel
•
Recommended mounting screws: #6
•
If alternate mounting surface is used, it MUST
be able to support four times the weight of the
unit.
Page 10
Milltronics BW500 and BW500/L - OPERATING INSTRUCTIONS 7ML19985DK05
mounting holes