10. Data Format Commands (P, G, R, W)
10.12 DATA FORMAT ("dAt.FMt")
BIT POSITION
7
6
5
4
0
1
0
1
0
1
0
1
EXAMPLE: To format the data string, which includes Alarm status, Peak/Valley,
Current, Filtered input value status, units of measure and listed by underline instead of
space separated:
The command data is 11001111 BIN. = CF HEX. Then send *W1BCF
TABLE 10.12 DATA FORMAT
3
2
1
0
0
1
0
1
0
1
0
1
DAt.FMt
Alarm Status - EXCLUDED
Alarm Status - INCLUDED
Peak / Valley Status - EXCLUDED
Peak / Valley Status - INCLUDED
Current Reading - EXCLUDED
Current Reading - INCLUDED
Filtered Value - EXCLUDED
Filtered Value - INCLUDED
Peak Value - EXCLUDED
Peak Value - INCLUDED
Valley Value - EXCLUDED
Valley Value - INCLUDED
Use Space as Separator
Use <CR. as Separator
Units of Measurement - EXCLUDED
Units of Measurement - INCLUDED
10-12