SonicWALL SMA 200 Getting Started Manual page 43

Allowing an SMA to LAN Connection
When users have connected to the SMA, they need to be able
to connect to resources on the LAN.
To allow an SMA to LAN connection:
1 Navigate to the Network > Address Objects page on the
gateway appliance.
2 In the Address Objects tab, click Add.
3 In the Add Address Object dialog box, create an address
object for the X0 interface IP address of your SMA
appliance:
Name
Zone Assignment
Type
IP Address
42 SonicWall Secure Mobile Access 200/400 Getting Started Guide
Name of the SMA appliance
SMA
Host
SMA appliance X0 IP address
(default 192.168.200.1)
4 Click Add to create the object. Once done, click Close.
5 Click Add again to create an address object for the
NetExtender range.
6 In the Add Address Object dialog box, create an address
object for the NetExtender range:
Name
Zone Assignment
Type
Starting IP Address
Ending IP Address
Name for NetExtender
SMA
Range
Start of the NetExtender IP
address range
(default 192.168.200.100)
End of the NetExtender IP
address range
(default 192.168.200.200)