SonicWALL SMA 200 Getting Started Manual page 54

2 When prompted, enter the User Name and Password
created in Adding a Local User on page 19 of this guide.
3 Select LocalDomain from the drop‐down menu and
click Login. The SonicWall Virtual Office screen displays
in your Web browser.
4 Click NetExtender to start the NetExtender client
installation.
5 If prompted, click Install to complete the client
installation.
6 Ping a host on your corporate LAN to verify your remote
connection.
You have now successfully set up your SMA appliance.
TIP: It is easier for remote users to access the SMA
appliance using a fully qualified domain name (FQDN)
rather than an IP address. It is recommended that you
create a DNS record to allow for FQDN access to your
SMA appliance. If you do not manage your own public
DNS servers, contact your ISP for assistance.
Firewall > Access Rules Matrix View
If the SMA zone does not appear in the Firewall > Access Rules
matrix view, verify that it is selected as the zone for the
gateway interface connected to the SMA appliance.
To ensure the SMA zone displays in the matrix view:
1 In the administrative interface of your SonicWall
appliance, navigate to the Network > Interfaces page.
SonicWall Secure Mobile Access 200/400 Getting Started Guide 53