• Enable Anti‐Spyware Service
8 Click OK.
9 In the Edit Interface window again, enter the IP address
for this interface in the IP Address field.
For example:
Scenario A
Scenario C
10 Enter your Subnet Mask.
11 Optionally enter the Default Gateway, which is the
WAN address of the gateway appliance.
12 If you want to allow management of the gateway
appliance over this interface, select the desired
management options.
13 If you want to allow users to log in to the gateway
appliance using this interface, select the desired user
login options.
14 Click OK to apply changes.
SonicWall Secure Mobile Access 200/400 Getting Started Guide
Use an IP address in the
default SMA X0 subnet
(default 192.168.200.x)
Use an IP address in the
gateway LAN subnet
(default 192.168.168.x)
39