SonicWALL SMA 200 Getting Started Manual page 50

14 In the Add Rule window, create a rule to allow access to
the LAN for the address group you just created:
From
To
Service Port
Service
Source
Destination
Users Allowed
Users Excluded
Schedule
Select the following
check box(es)
15 Click OK to create the rule.
This completes Scenario B. Continue to Testing and
DMZ
LAN
Any
Any
The address group you just
created, such as SMA and
NetExtender 2.
Any
All
None
Always on
• Enable Logging
• Allow Fragmented
Packets
Troubleshooting Your Remote Connection on page 52.
NOTE: Some gateway appliances have a default zone
named SSLVPN. Do not select this zone when
configuring for the SMA appliance. The SSLVPN zone is
intended for use with the more limited SSLVPN features
that are included in the firewall products.
Scenario C: Connecting the SMA
on the LAN
The following procedures explain how to configure your
gateway appliance based on Scenario C:
• Connecting the SMA to the Gateway on page 49
• Configuring SMA to LAN Connectivity on page 50
Connecting the SMA to the Gateway
To connect the SMA using Scenario C:
1 Connect one end of an Ethernet cable to an unused
port on your LAN hub or switch.
2 Connect the other end of the Ethernet cable to the X0
port on the front of your SonicWall Secure Mobile
SonicWall Secure Mobile Access 200/400 Getting Started Guide 49