SonicWALL SMA 200 Getting Started Manual page 47

2 On the Welcome page, select the Public Server Guide,
and then click Next.
3 On the Public Server Guide page of the Wizard, select:
Service Type
Services
The Add Service Group dialog box is displayed.
46 SonicWall Secure Mobile Access 200/400 Getting Started Guide
Other
Create new group
4 In the Add Service Group dialog box, create a service
group for HTTP and HTTPS:
• Enter a name for the service.
• Select both HTTP and HTTPS and click the arrow
button to move to the right column.
• Click OK.
5 On the Server Private Network Configuration page,
enter the following Server information and click Next:
Server Name
Server Private IP
Address
Server Comment
6 On the Server Public Information page, accept the
default IP address or enter a new IP address in your
allowed public IP range. Click Next.
NOTE: The default IP address is the WAN IP address of
your SonicWall firewall. If you accept this default, all
HTTP and HTTPS traffic to this IP address will be routed
to your SMA appliance.
7 The Public Server Configuration Summary page displays
all configuration actions that will be performed. Click
Name for the SMA appliance
The X0 IP address of the SMA
appliance within your DMZ
range, such as 10.1.1.10/24.
Brief description of the server