SonicWALL SMA 200 Getting Started Manual page 51

Access 200/400. The X0 Port LED lights up indicating an
active connection.
3 Configure the SMA X0 IP address. Refer to Configuring
the X0 IP Address on page 34.
Configuring SMA to LAN Connectivity
NOTE: Before continuing, you must add a new SMA
custom zone. Refer to Adding a New SMA Custom Zone
on page 38 for more information.
In order for users to access local resources through the SMA
appliance, you must configure your gateway device to allow an
outside connection through the SMA into your LAN.
To allow an SMA to LAN connection:
1 Log into your gateway appliance as an administrator
and navigate to the Network > Address Objects page.
2 In the Address Objects tab, click Add.
50 SonicWall Secure Mobile Access 200/400 Getting Started Guide
3 In the Add Object dialog box, create an address object
for the X0 interface IP address of your SMA:
Name
Zone Assignment
Type
IP Address
4 Click Add to create the object. After adding, click Close.
5 Click Add again to create an address object for the
NetExtender range.
6 In the Add Object dialog box, create an address object
for the NetExtender range, using the following options:
Name
Zone Assignment
Type
Name for the SMA appliance
SMA
Host
SMA appliance X0 IP address
(default 192.168.200.1)
Name for NetExtender
SMA
Range