SonicWALL SMA 200 Getting Started Manual page 42

3 On the Public Server Guide, select these options:
Service Type
Services
4 In the Add Service Group dialog box, create a service
group for HTTP and HTTPS:
• Enter a Name for the service.
• Select both HTTP and HTTPS and click the arrow
button to move them to the right column.
• Click OK.
Other
Create new group
5 On the Server Private Network Configuration page,
enter the following server and SMA information, and
then click Next:
Server Name
Server Private
IP Address
Server Comment
6 On the Server Public Information page, accept the
default IP address, or enter an IP address in your
allowed public IP range. Click Next.
NOTE: The default IP address is the WAN IP address of
your SonicWall security appliance. If you accept this
default, all HTTP and HTTPS traffic to this IP address will
be routed to your SMA appliance.
7 The Public Server Configuration Summary page displays
all the configuration actions that will be performed.
Click Apply to create the configuration and allow access
from the WAN to the SMA on the DMZ.
SonicWall Secure Mobile Access 200/400 Getting Started Guide
Specify the name for the SMA
appliance
SMA appliance X0 IP address
Brief description of the server
41