SonicWALL SMA 200 Getting Started Manual page 53

14 In the Add Rule window, create a rule to allow access to
the LAN for the address group you just created:
From
To
Source Port
Service
Source
Destination
Users Allowed
Users Excluded
Schedule
Select the following
check box(es)
15 Click OK to create the rule.
This completes Scenario C. Continue to Testing and
Troubleshooting Your Remote Connection on page 52.
NOTE: Some gateway appliances have a default zone
named SSLVPN. Do not select this zone when
configuring for the SMA appliance. The SSLVPN zone is
intended for use with the more limited SSLVPN features
that are included in the firewall products.
52 SonicWall Secure Mobile Access 200/400 Getting Started Guide
SMA
LAN
Any
Any
The address group you just
created, such as SMA to LAN.
Any
All
None
Always on
Enable Logging
Allow Fragmented Packets
Testing and Troubleshooting
Your Remote Connection
You have now configured your SonicWall gateway appliance
and SMA appliance for secure remote access.
This section provides information on the following topics:
• Verifying a User Connection from the Internet on page
52
• Firewall > Access Rules Matrix View on page 53
Verifying a User Connection from the
Internet
You can verify your connection using a remote client on the
WAN.
To verify a User Connection from the Internet:
1 From a WAN connection outside of your corporate
network, launch a Web browser and enter the
following:
https://<WAN_IP_address_of_gateway_device>