For example, if your current Transparent range is
67.115.118.75 through 67.115.118.80, and you wish to
support 50 concurrent NetExtender clients, configure your
SMA X0 interface with an available IP address in the
Transparent range, such as 67.115.118.80, and configure your
NetExtender range as 192.168.10.100 to 192.168.10.200.
Then, on your gateway device, configure a static route to
192.168.10.0, using 67.115.118.80.
Adding a New SMA Custom
Zone
Adding a new SMA custom zone on your gateway appliance is a
necessary step in deploying your SMA appliance using
Scenarios A and C. For more information, see the following
sections:
• Scenario A: Connecting the SMA on a New DMZ on
page 40
•
Scenario C: Connecting the SMA on the LAN on page 49
To add a new SMA custom zone on the gateway
appliance:
1 Log into your gateway appliance as an administrator
and navigate to the Network > Interfaces page.
38
SonicWall Secure Mobile Access 200/400 Getting Started Guide
2 Click the Configure icon for the interface connected to
your SMA, such as X2.
3 Select Create new zone in the Zone field.
The Add Zone window opens.
4 Enter SMA in the Name field.
5 Select Public from the Security Type drop‐down menu.
6 Clear the Allow Interface Trust check box.
7 Select the following check boxes:
• Enable Gateway Anti‐Virus Service
• Enable IPS