Apply to create the configuration and allow access from
the WAN to the SMA appliance on the DMZ.
Allowing DMZ to LAN Connection
When users have connected to the SMA, they need to be able
to connect to resources on the LAN.
To allow a DMZ to LAN connection:
1 On your gateway appliance, navigate to the Network >
Address Objects page.
2 In the Address Objects tab, click Add.
3 In the Add Object dialog box, create an address object
for the X0 interface IP address of your SMA appliance:
Name
Zone Assignment
Type
IP Address
Name for the SMA appliance
DMZ
Host
X0 IP address of the SMA
appliance within your DMZ
range, such as 10.1.1.10.
4 Click OK to create the object. Once added, click Close.
5 Click Add again to create an address object for the
NetExtender range.
6 In the Add Object dialog box, create an address object
for the NetExtender range using the following options,
then click Add:
Name
Zone Assignment
Type
Starting IP address Start of the NetExtender IP
Ending IP address
SonicWall Secure Mobile Access 200/400 Getting Started Guide
Name for NetExtender
DMZ
Range
address range within your DMZ
range, such as 10.1.1.220.
End of the NetExtender IP
address range within your DMZ
range, for example 10.1.1.249.
47