Site Requirements And Specifications; System Requirements; Hardware Specifications - Enterasys R1 SOHO Setup And Installation Manual

Enterasys roamabout r1 soho access point: install guide
Hide thumbs Also See for R1 SOHO:
Table of Contents

Advertisement

Site Requirements and Specifications

Please review the site requirements and specifications before you install the RoamAbout
R1.

System Requirements

You must have the following minimum requirements:
Internet access from your local telephone company or ISP using an xDSL modem,
Cable modem, ISDN TA, or PSTN analog modem. You may also have access over the
telephone system to an analog modem at another site.
A PC using a fixed IP address or dynamic IP address assignment via DHCP, as well as
a Gateway server address and DNS server address from your service provider.
For wired LAN connection, you need a computer equipped with a 10 Mbps, 100 Mbps,
or 10/100 Mbps Fast Ethernet card, or a USB-to-Ethernet converter. For wireless LAN
connections, each computer must have an 11 Mbps wireless adapter.
A RoamAbout PC Card for each computer. The RoamAbout R1 supports up to 32
users.
TCP/IP network protocol installed on each PC that needs to access the Internet.
A Java-enabled Web browser, Microsoft Internet Explorer V5.0 (or higher) or
Netscape Communicator V4.0 (or higher) installed on one PC at your site to configure
the RoamAbout R1.

Hardware Specifications

The hardware and port (Interface) specifications are listed in
Table 1-2:
Parameter
Width
Depth
Length
Weight
RoamAbout R1 Physical Specifications
RoamAbout R1
188 mm. (7.41 in.)
99 mm. (3.90 in.)
334 mm. (13.16 in.)
1.15 kg (2.53 lbs.)
Table 1-2
Table 1-3
and
.
1-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Roamabout r1

Table of Contents