Graco Reactor 2 E-XP2 Operation page 49

5. Navigate back to the Run Mode Home screen.
The hose now displays a current instead of a
temperature.
Note
Until the RTD sensor is repaired, the
T6DH sensor error alarm will display
each time the system is powered up.
333023D
Disable Manual Hose Mode
1. Enter Setup Mode and navigate to System 2
Screen and deselect Enable Manual Hose Mode,
or repair the hose RTD cable or FTS.
2. Manual hose mode is automatically disabled
when the system detects a valid RTD sensor in
the hose.
Spraying
49