Models - Graco Reactor 2 E-XP2 Operation

Models

Reactor 2 E-30 and E-30 Elite
All elite systems include fluid inlet sensors, Graco InSite
part numbers, see Accessories, page 11
Model
Proportioner ★
Maximum Fluid Working
Pressure psi (MPa, bar)
Approximate Output per
Cycle (A+B) gal. (liter)
Max Flow Rate lb/min
(kg/min)
Total System Load †
(Watts)
Configurable Voltage
Phase
Full Load Peak Current* 78
Fusion AP Package 
(Gun Part No.)
Fusion CS Package 
(Gun Part No.)
Probler P2 Package 
(Gun Part No.)
Heated Hose
50 ft (15 m)
Heated Whip Hose
10 ft (3 m)
Graco Insite
™
Fluid Inlet Sensors (2)
Full load amps with all devices operating at
*
maximum capabilities. Fuse requirements
at various flow rates and mix chamber sizes
may be less.
Total system watts used by system, based on

maximum heated hose length for each unit.
• E–30 and E–XP2 series: 310 ft (94.5 m)
maximum heated hose length, including
whip hose.
333023D
Base Model
E-30, 10 kW E-30, 15 kW
272010 272011
2000 (14, 140) 2000 (14, 140)
0.0272 (0.1034) 0.0272 (0.1034)
30 (13.5) 30 (13.5)
17,900 23,000
230 230 380 230
1Ø 3Ø∆ 3ØY 1Ø
50 34 100
AP2010 AP2011
(246102) (246102)
CS2010 CS2011
(CS02RD) (CS02RD)
P22010 P22011
(GCP2R2) (GCP2R2)
24K240 (scuff 24K240 (scuff
guard) guard)
246050 246050
, and Xtreme-Wrap 50 ft (15 m) heated hose. For
™
Elite, 10 kW
272110
2000 (14, 140)
0.0272 (0.1034)
30 (13.5)
17,900
230 380 230 230
3Ø∆ 3ØY 1Ø 3Ø∆
62 35 78 50
AP2110
(246102)
CS2110
(CS02RD)
P22110
(GCP2R2)
24Y240 (Xtreme-
Wrap)
246050
✓
✓
★
See Approvals, page
Packages include gun, heated hose, and

whip hose. Elite packages also include
Graco InSite and fluid inlet sensors.
Models
Elite Model
Elite, 15kW
272111
2000 (14, 140)
0.0272 (0.1034)
30 (13.5)
23,000
380 230 230 380
3ØY 1Ø 3Ø∆ 3ØY
34 100 62 35
AP2111
(246102)
CS2111
(CS02RD)
P22111
(GCP2R2)
24Y240 (Xtreme-
Wrap)
246050
✓
✓
11.
9