Setup Mode - Graco Reactor 2 E-XP2 Operation

Advanced Display Module (ADM) Operation

Setup Mode

The ADM will start in the Run screens at the Home screen. From the Run screens, press to
access the Setup screens. The system defaults with no password, entered as 0000. Enter the
current password then press . Press to navigate through the Setup Mode screens. See
Setup Screens Navigation Diagram, page 45.
Set Password
Set a password to allow Setup screen access, see Advanced Screen 1 – General, page 33. Enter any number
from 0001 to 9999. To remove the password, enter the current password in the Advanced Screen – General
screen and change the password to 0000.
From the Setup screens, press to return to the Run screens.
333023D 31