Diagnostic
Use this screen to view information for all system
components.
The following information is displayed:
Temperature
• A Chemical
• B Chemical
• Hose Chemical
• TCM PCB — temperature control module
temperature
Amps
• A Current
• B Current
• Hose Current
Volts
• MCM Bus — displays the voltage supplied to the
motor controller, which is the DC voltage that has
been converted from the AC voltage supplied to
the system
• Hose Voltage (90V)
Pressure
• Pressure A — chemical
• Pressure B — chemical
Cycles
• CPM — cycles per minute
• Total Cycles — lifetime cycles
333023D
Advanced Display Module (ADM) Operation
Job Data
Use this screen to enter a job name or number.
Recipes
Use this screen to select an enabled recipe. Use the
up and down arrows to highlight a recipe and press
to load. The currently loaded recipe is outlined
by a green box.
Note
This screen will not display if there are not
any enabled recipes. To enable or disable
recipes, see
Recipes Setup Screen, page
34.
39