11
SERVICE WORK ON THE CHASSIS
11.9
Removing the lower triple clamp
–
Position the brake caliper, and mount and tighten screws
Guideline
Screw, front brake caliper
–
Position the brake line and clamp. Mount and tighten screws
S01484-11
Finishing work
–
Install the front wheel.
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
–
Remove the start number plate. (
–
Dismount the front fender. (
Main work
–
Remove fuel tank breather
–
Remove nut
–
Remove screw
aside.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
S01486-10
–
Remove protective ring
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
S01487-10
M8
(
p. 67)
(
p. 67)
(
p. 33)
p. 38)
p. 38)
.
.
, take off the upper triple clamp with the handlebar and set it
.
.
20 Nm
Loctite
(14.8 lbf ft)
.
p. 31)
34
®
243™