11.11
Removing the lower triple clamp
SERVICE WORK ON THE CHASSIS 11
(ROCKSTAR EDITION)
–
Tighten screws
Guideline
Screw, top triple
clamp
–
Tighten screws
Guideline
Screw, bottom
A00506-11
triple clamp
–
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front
brake caliper
–
Position the brake line and the clamp. Mount and tighten
5
screws
.
S02315-11
Finishing work
–
Install the front wheel.
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
–
Remove the start number plate. (
–
Remove front fender. (
–
Remove the handlebar cushion.
Main work
(FC 450, FX 450)
–
Open cable holder
harness.
–
Remove screw
–
Remove screw
–
Take off the upper triple clamp with the handlebar and
place to one side.
S02316-10
Info
Cover the components to protect them against
damage.
Do not kink the cables and lines.
2
.
M8
17 Nm (12.5 lbf ft)
3
.
M8
12 Nm (8.9 lbf ft)
M8
25 Nm (18.4 lbf ft)
Loctite
(
p. 108)
p. 52)
(
p. 107)
(
p. 55)
p. 63)
p. 64)
1
on the left and detach the wiring
2
.
3
.
4
.
®
243™
57