12
BRAKE SYSTEM
12.13
Checking the rear brake linings
Warning
Danger of accidents Worn-out brake linings reduce the braking effect.
–
Ensure that worn-out brake linings are replaced immediately. (Your authorized Husqvarna Motorcycles workshop will be
glad to help.)
12.14
Changing the rear brake linings
Warning
Skin irritation Brake fluid causes skin irritation.
–
Keep brake fluid out of the reach of children.
–
Wear suitable protective clothing and safety glasses.
–
Do not allow brake fluid to come into contact with the skin, the eyes or clothing.
–
Consult a doctor immediately if brake fluid has been swallowed.
–
Rinse the affected area with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water immediately and consult a doctor if brake fluid comes into contact with the eyes.
–
If brake fluid spills on to your clothing, change the clothing.
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Check the rear brake linings. (
Main work
–
Remove screws
–
Take off cover
E00552-10
–
Add brake fluid up to level
Guideline
Level
reservoir rim)
Brake fluid DOT 4 (
–
Position the cover with the washer and membrane.
–
Mount and tighten the screws.
E00548-10
Info
Clean up overflowed or spilled brake fluid immediately with water.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Check the brake linings for minimum thickness
Minimum thickness
»
If the minimum thickness is less than specified:
–
Change the rear brake linings.
–
Check the brake linings for damage and cracking.
»
If damage or wear is encountered:
–
Change the rear brake linings.
E00549-10
p. 64)
.
with washer
and membrane
.
(brake fluid level below
p. 90)
p. 31)
.
10 mm (0.39 in)
p. 31)
.
≥ 1 mm (≥ 0.04 in)
(
p. 64)
(
p. 64)
64