Removing The Start Number Plate; Installing The Start Number Plate; Dismounting The Front Fender; Installing The Front Fender - Husqvarna TC 65 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.14

Removing the start number plate

11.15

Installing the start number plate

11.16

Dismounting the front fender

11.17

Installing the front fender

–
Remove screw
–
Detach and remove the start number plate.
S01493-10
–
Attach the start number plate.
–
Position the start number plate.
Holding lugs
S01494-10
–
Mount and tighten screw
Guideline
Start number plate screw
S01495-10
–
Remove screws
S01496-10
–
Position start number plate on the fender.
The holding lugs of the start number plate engage in drill holes
fender.
S01497-10

.

engage in the fender.

.

. Remove the front fender.
M6 4 Nm (3 lbf ft)

38
of the