Substances - Husqvarna TC 65 Owner's Manual

21

SUBSTANCES

Brake fluid DOT 4
Standard/classification
–
DOT
Guideline
–
Use only brake fluid that complies with the specified standard (see specifications on the container) and that possesses the cor-
responding properties.
Recommended supplier
®
Bel‑Ray
–
Super DOT 4 Brake Fluid
Coolant
Guideline
–
Only use high-grade, silicate-free coolant with corrosion inhibitor additive for aluminum motors. Low grade and unsuitable
antifreeze causes corrosion, deposits and frothing.
–
Do not use pure water as only coolant is able to meet the requirements needed in terms of corrosion protection and lubrication
properties.
–
Only use coolant that complies with the requirements stated (see specifications on the container) and that has the relevant
properties.
Antifreeze protection to at least
The mixture ratio must be adjusted to the necessary antifreeze protection. Use distilled water if the coolant needs to be diluted.
The use of premixed coolant is recommended.
Observe the coolant manufacturer specifications for antifreeze protection, dilution and miscibility (compatibility) with other coolants.
Recommended supplier
®
Bel‑Ray
–
Moto Chill Racing Coolant
Engine oil (SAE 10W/40)
Standard/classification
–
JASO T903 MA ( p. 93)
–
SAE ( p. 93) (SAE 10W/40)
Guideline
–
Use only engine oils that comply with the specified standards (see specifications on the container) and that possess the corre-
sponding properties.
mineral engine oil
Recommended supplier
®
Bel‑Ray
–
EXL Mineral 4T
Engine oil, 2-stroke
Standard/classification
–
JASO FD ( p. 93)
Guideline
–
Only use high grade 2-stroke engine oil of a reputable brand.
Synthetic engine oil
Recommended supplier
®
Bel‑Ray
–
Si‑7 Synthetic 2T
−25 °C (−13 °F)
90