Removing The Seat; Mounting The Seat; Removing The Air Filter - Husqvarna TC 65 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.26

Removing the seat

11.27

Mounting the seat

11.28

Removing the air filter

Note
Engine damage Unfiltered intake air has a negative effect on the service life of the engine.
Dust and dirt will enter the engine without an air filter.
–
Never start to use the vehicle without an air filter.
–
Secure brake line
–
Position splash protector
Guideline
Screw, splash protector
S01500-11
Finishing work
–
Install the main silencer. (
–
Install the right side cover. (
–
Remove the motorcycle from the lift stand. (
–
Open quick release
–
Pull back the seat and remove it.
S01515-10
–
Hook seat onto screw
The catch
S01516-10
–
Close quick release
S01515-11

in the holder.

, mount screws
p. 46)
p. 40)

and raise the rear of the seat.

and lower the seat at the rear and push it forward.

hooks into the fuel tank.

.

with bushings and tighten.
EJOT PT ® 2 Nm (1.5 lbf ft)
K60x25-Z
p. 31)
44