Installing The Lower Triple Clamp - Husqvarna TC 65 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.10

Installing the lower triple clamp

5 0 0 5
Main work
–
Clean the bearing and sealing elements, check for damage, and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount upper steering head

bearing
–
Check whether upper steering head seal
–
Push on protective ring
602666-11
–
Position the upper triple clamp with the handlebar.
–
Mount nut
S01488-10
–
Position the fork legs.
Bleeder screws
Info
The upper milled groove in the fork leg must be flush with the upper edge
of the upper triple clamp.
0 0 0 5 5
S01480-11
–
Tighten screws
Guideline
Screw, bottom triple clamp
S01489-10
–
Tighten nut
Guideline
Nut, steering stem
S01490-10
p. 92)
.

.

, but do not tighten it yet.

are positioned toward the rear.

.

.

is correctly positioned.
M8 15 Nm (11.1 lbf ft)
M20x1.5 10 Nm (7.4 lbf ft)
35