Honda TRX400EX FOURTRAX 1999 Service Manual page 85

Install the removed parts from engine removal proce-
dure (page 6-2 to 6-3) in the reverse order or removal.
TORQUE: Gearshift pedal pinch bolt:
20 N m 12.0
NOTE:
Route the wires, cables and tubes properly (page
1-18).
When installing the gearshift pedal, align the
punch marks on the pedal and spindle.
When installing the drive sprocket, install with the
"OUT SIDE" mark facing out. Set the fixing plate
into the countershaft groove and move it to align
the bolt holes in the plate and sprocket then tighten
the bolts.
Install the following:
- oil pipes (page 4-7)
brake pedal (page 14-20)
-
-exhaust system (page 2-61
-carburetor assembly (page 5-12)
tank and heat protector (page 2-4)
Perform the following adjustments:
-
drive chain (page 3-13)
-clutch cable (page 3-17)
- throttle cable (page 3-4)
Fill with engine oil (page 3-9).
ENGINE REMOVAL/INSTALLATION
6-5