CYLINDER HEAD COVER INSTALLATION
Apply molybdenum oil solution to the slipper surfaces
of the rocker arms and sub-rocker arms.
Clean the mating surfaces of the cylinder head and
head cover.
Pour engine oil into the oil pocket in the cylinder head.
Rotate the crankshaft counterclockwise and align the
The crankshaff
"T" mark on the flywheel with the index notch in the
left crankcase cover so that the cam lobes are facing
only
down.
This must be
done to prevent
the one-way
decompressor
system
functioning.
Install the dowel pins and a new gasket
CYLINDER HEAD/VALVE
\