Honda TRX400EX FOURTRAX 1999 Service Manual page 192

REAR WHEELlSUSPENSlON
Install the driven sprocket with the chamfered side of
the bolt holes facing in.
Coat a new O-ring with oil and install
driven sprocket flange and axle.
Install the axle into the swingarm through the drive
chain until
driven sprocket.
Coat a new O-ring with oil and install
groove in the disc hub.
Apply grease to the disc hub splines.
Install the brake disclhub onto the axle with the
stamp facing out.
Install the inner and outer lock nuts onto the axle.
Install the stopper ring but do not install
ring groove yet.
Apply grease t o the hub nut threads and seating sur-
face.
Install the wheel hub and hub nut onto the axle.
Tighten the hub nut to the specified torque and fur-
ther tighten it until its grooves align with the cotter
pin hole.
TORQUE: 137 N.m
Install a new cotter pin.
Install the wheels (page
13-8
it is fully seated. Install the chain over the
(14.0 kgfm, 101
between the
it
into the
it
into the
it
COTTER PIN'
'ROCKET