BALANCER
Check the balancer gear for wear or damage.
INSTALLATION
Apply oil to a new crankshaft bearing.
Drive the crankshaft bearing into the left crankcase
with the marking side facing up.
TOOLS
Driver
Attachment, 72 x 75 mm
Pilot. 30 mm
Engage the balancer and crankshaft by aligning the
index lines on the balancer drive and driven gears as
shown, and install the crankshaft and balancer
together into the left crankcase.
07749-0010000
-
07746
0010600
07746-0040700
11-11